Must-see for first kart driving

Hobbies are not directly related to the industry they are engaged in, such as a PP LID FOR PAPER BOWL manufacturer may like to listen to dramas, and a CHIP SCOOP supplier likes to play karts, so forgetting stereotypes. This article are mainly for the first drive, you must notice them.

Origin

In the earliest days, karting was a toy designed by parents for their children to play in the back garden or large parking lot. It was originally modified with a lawnmower, and the equipment and engine were very simple. Gradually, karts have been continuously improved and transformed in terms of performance and venue safety. In addition, venues for standard competitions have been completed. Since the entry technology and cost requirements are not very high, it has rapidly developed into a suitable for young and old. International sports events, large and small, all over the world have emerged as the times require. Among the most representative events are the All-European Karting Championship and the Japan World Cup Championship. In terms of safety, karts have a very low center of gravity and are easy to control; therefore, karts can be regarded as the safest car in motorsports.

Busy with oem FOOD TRAY, oem 2-CUP CARRIER, oem PP LID FOR SOUP CONTAINER design,
Production, processing, and final packaging are completed. You may keep your kart hobby in the bottom of your heart, and you haven't started it yet.

Begin to implement, but it just so happened that the goods have been shipped, start planning your karting plan. If this is your first time to drive, you need to pay attention to the following matters.

Considerations for driving a karting for the first time?

The following is not an orthodox kart driving method, but it is suitable for the first time to get started quickly.

It is best to choose a small displacement 4-stroke entertainment kart for the first time

1. Familiar with the track in the first two laps

2. Try to speed up and overcome fear

3. Before a U-turn (slow bend), brake heavily to slow down and enter the bend

4. If the speed does not slow down before entering the corner (the brake point is not well grasped), push the direction hard. The most often is the car hitting sideways or severely flicking the tail. Avoid installing the tire wall.

Can the accelerator and brake be stepped on at the same time when the kart enters a corner?

Yes, but at the cost of accelerated gearbox losses. The entertainment kart uses a single-speed gearbox on a pedal motorcycle. You can understand the connection method as a continuous half-clutch. Stepping on the accelerator and brake at the same time will cause the gearbox to accelerate and heat up sharply. In severe cases, it will cause the gearbox to hang up due to high temperature. Therefore, the staff will emphasize that they cannot be stepped on at the same time.

If you want to maintain the speed, you need to loosen the oil through the larger corners and turn on the oil in advance when exiting the corner. Due to the characteristics of the single-speed gearbox, the wheels and the engine are not rigidly connected, so there is no need to worry about turning on the oil in advance to damage the body dynamics; Through a small corner, if you don't want to loosen the oil and cause the speed to drop, you can tap the brake while maintaining the throttle opening to help the center shift. Don't step too much and it will be fine.

OK, mastering them and starting your first kart driving, have a nice time~😉